Upgrade your SunRocket Innomedia 6328 Telephone Adapter

How to upgrade your SunRocket Innomedia 6328 Telephone Adapter for Compatibility with Net2Phone VoiceLine service 

Please follow these directions carefully:

  1. Download the Net2Phone firmware file “6328-net2phone-firmware-u” and save it on your Desktop and then unzip it.
  2. Unplug the WAN (Internet) cable from the Telephone Adaptor (MTA).
  3. Ensure that your electrical power is connected to the device. No other cables should be plugged into the device at this time.
  4. Push a pin in the RSTR switch next to the WAN port on the back of the device and hold it for 10 seconds. Wait until the RUN light starts blinking Green.
  5. Connect your PC to the LAN port on the MTA. Make sure WAN port is not connected to the Internet.
  6. Open your Internet browser (e.g., Internet Explorer) and in the address bar, type: 192.168.251.1/Voice_adminPage.htm
    (S
    ee screen shot below. If you do not get a login prompt, reboot the MTA by unplugging and replugging the power cord.)
  7. Enter Username: admin
    Password: slapshot
    If this password does not work, try the following password: 7UprUtew
  8. From the left menu bar, click on “Management” and click on “Firmware Upload” option (see screenshot below).
  9. Click the “Browse” button and select the firmware file “6328-net2phone-firmware” saved locally on your Desktop in Step 1.
  10. Click the “Upload” button and wait for a few minutes for the firmware upgrade to complete. The RUN light on the Telephone Adapter will be blinking RED while the upgrade is in process. Wait for the RUN light on top of the Telephone Adapter to turn GREEN and back to blinking RED. This process should take about 2 minutes.
  11. Once the upgrade is complete, open a new Internet browser page and type 192.168.251.1 in your browser address line. (If this does not work try 192.168.99.1)
  12. Enter Username: admin
    Password: slapshot
    If this password does not work, try the following password: admin
  13. Click on “Restore Default Values” and click “OK”.
  14. Your Telephone Adapter will reboot automatically and will now be ready for Net2Phone VoiceLine service.
  15. Connect your Internet cable from the modem or your router to the WAN port on the Telephone Adapter.
  16. Unplug the power cord from your Adapter and plug it back in to reboot the device.
  17. Plug your phone in to the “Phone 1” port on the Telephone Adapter and listen for dial tone.